If you are unable to proceed beyond the Printer Connection screen, make sure that the USB cable issecurely plugged into the USB port of the machine and is connected to the computer, and thenfollow the procedure below to reinstall the MP Drivers.NoteIn Windows Vista, "The printer is not detected. Check the connection." may be displayeddepending on the computer you use. In this case, wait for a while. If you still cannot proceed tothe next step, follow the procedure below to reinstall the MP Drivers.1. Click Cancel on the Printer Connection screen.2. Click Start Over on the Installation Failure screen.3. Click Back on the screen that appears next.4. Click Exit on the PIXMA XXX screen, then remove the CD-ROM.5. Turn the machine off.6. Restart the computer.7. Make sure that you have no application software running.8. Follow the procedure described in your setup manual to reinstall the MP Drivers.In other cases:Follow the procedure described in your setup manual to reinstall the MP Drivers.If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, andthen reinstall the MP Drivers.Uninstalling the MP DriversIf you reinstall the MP Drivers, select Custom Install on the Setup CD-ROM.NotePage 789 of 947 pagesCannot Install the MP Drivers
