Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > InputSettingsInput SettingsInput Settings allows you to set the following items:Select SourceThe type of document to be scanned is displayed. Platen is set by default.Paper SizeSelect the size of the document to be scanned.When you select a size, the Preview area size changes accordingly.ImportantWhen film is selected for Select Source, the item name changes to Film Size.Some applications have a limit to the amount of scan data they can receive. ScanGear (scannerdriver) can scan data that is of:- 21000 pixels x 30000 pixels or less- 10000 pixels x 30000 pixels or less (in 48 bit color or 16 bit grayscale)If you change Paper Size after previewing, the preview image will be deleted.NoteIf you are not sure which size you should select for Paper Size, set Paper Size to Full Platen, thenmeasure the size of the document and enter the values into (Width) and (Height).Film SizeSelect the size of the film to be scanned.NoteThis setting is available in whole film image view only. In thumbnail view, click (Thumbnail)on the Toolbar.Color ModeSelect how to scan the document.ColorSelect this mode to scan color documents or film, or to create color images. This mode rendersPage 624 of 947 pagesInput Settings
