If multiple sheets of plain paper is fed from the machine, select the setting for preventing double-feed of plainpaper using the operation panel or your computer.* After printing is finished, disable the setting for preventing double-feed of plain paper; otherwise, the setting isapplied from the next time.• To set by using the operation panelPress the HOME button, select Setup, Device settings, and Print settings in this order, and then setPrevent paper double-feed to ON.Changing the Machine Settings Using the Operation Panel• To set by using your computerOpen the printer driver setup window, and in Custom Settings in the Maintenance sheet, select thePrevent paper double-feed check box, and then click OK.To open the printer driver setup window, see How to Open the Printer Driver Setup Window.Note• Printing speed will be reduced if Prevent paper double-feed function is enabled.Check8 Clean the paper feed roller.Cleaning the Paper Feed RollerNote• Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continuesafter removing the paper, contact the service center.798Downloaded from ManualsPrinter.com Manuals
