Forwarding Scanned Data to the Computer Using the OperationPanel of the MachineBefore forwarding scanned data to the computer, confirm the following:• MP Drivers are installed.If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from ourwebsite.• The machine is connected to a computer correctly.Make sure that the machine is connected to the computer correctly.Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in thesleep or standby mode.If you perform scanning via a network connection, make sure that all the required settings have beenspecified.Network Scan Settings• The destination and the file name are specified in Canon IJ Scan Utility.You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings ofCanon IJ Scan Utility:Settings Dialog Box1. Make sure that the machine is turned on.2. Flick the HOME screen, then tap Scan.Using the Operation PanelIf you forward the data to the USB-connected computer:The Scan standby screen is displayed.Go to step 3.Note• If the screen for selecting to which you save the data is displayed, tap PC, then tap Local (USB).The Scan standby screen is displayed.If you forward the data to the network-connected computer:The screen for selecting to which you save the data is displayed.739Downloaded from ManualsPrinter.com Manuals
