Canon MG6600 series Online Manual

Also see for MG6600 Series: Manual Online manual Manual Getting started Getting started

Contents

Canon MG6600 series Online Manual Manual pdf 279 page image

Changing the WPA/WPA2 Detailed SettingsNote• This screen is not available depending on the printer you are using.To change the wireless network settings of the printer, connect the printer and the computer with a USBcable temporarily. If you modify the wireless network settings of the computer over wireless connectionwithout USB connection, your computer may not be able to communicate with the machine after modifyingthe settings.The example screenshots in this section refer to the WPA detailed settings.1. Start up IJ Network Tool.2. Select the printer in Printers:.When the printer is connected to the computer with a USB cable temporarily, select the printer with"USBnnn" (where "n" is a number) appearing in the Port Name column.3. Select Configuration... from the Settings menu.4. Click the Wireless LAN tab.5. Select Use WPA/WPA2 in Encryption Method: and click Configuration....The WPA/WPA2 Details screen is displayed.If encryption is not set to the printer, the Authentication Type Confirmation screen is displayed. Go tostep 7.6. Click Change Settings....7. Check the client authentication type and click Next>.279Downloaded from ManualsPrinter.com Manuals