◦ select Photo for Doc.type and specify Auto scan for Scan size to scan one original• Scan one printed photo, postcard, business card, or disc with a software application on a computerPlace the original WITH THE SIDE TO SCAN FACING DOWN, with 0.4 inch (1 cm) or more spacebetween the edges (diagonally striped area) of the platen glass. Portions placed on the diagonally stripedarea cannot be scanned.Loading Two or More Originals on the platen glass• Scan two or more printed photos in Photo copy• In Scan,◦ select Auto scan for Doc.type to scan two or more printed photos, postcards, or business cards◦ select Photo for Doc.type and specify Auto multi scan for Scan size to scan two or moreoriginals• Scan two or more printed photos, postcards, or business cards with a software application on acomputerPlace the originals WITH THE SIDE TO SCAN FACING DOWN. Allow 0.4 inch (1 cm) or more spacebetween the edges (diagonally striped area) of the platen glass and the originals, and between theoriginals. Portions placed on the diagonally striped area cannot be scanned.You can place up to 12 items.(A) More than 0.4 inch (1 cm)Note• The Skew Correction function automatically compensates for the originals placed at an angle of up toapproximately 10 degrees. Slanted photos with a long edge of 7.1 inches (180 mm) or more cannotbe corrected.• Non-rectangular or irregular shaped photos (such as cut out photos) may not be scanned properly.174Downloaded from ManualsPrinter.com Manuals
