Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Setting the PaperSource for Plain PaperP032Setting the Paper Source for Plain PaperWhen you select Automatically Select from Paper Source, you can use the printer driver to select thepaper source for plain paper.The procedure for setting the paper source is as follows:Paper Source Setting for Plain Paper1. Open the printer driver setup window2. Click Paper Source Setting for Plain Paper on the Maintenance tabThe Paper Source Setting for Plain Paper dialog box opens.NoteIf the machine is off or bi-directional communication is disabled, a message may appearbecause the computer cannot collect the machine status.If this happens, click OK to display the most recent settings specified on your computer.3. Transmit the settingsSelect the paper source for plain paper, and then click the Send button.The selected settings are enabled hereafter.ImportantThe descriptions in the machine manual assume that the plain paper is supplied from thecassette. When you change the paper source setting, replace all instances of "cassette" with thenew paper source.Page topPage 852 of 1037 pagesSetting the Paper Source for Plain PaperDownloaded from ManualsPrinter.com Manuals
