0ALJ-061Scanning Using the [Scan > PC] KeyPlace a document on the machine, and press or , and scanning starts immediately. The type ofscan (color or black and white), the save destination for the document, and other settings can be registeredto a key, and documents can be scanned using those settings. This section describes how to register settingsin a key and scan with it.Registering Your Settings in the [Scan > PC] KeyUsing the [Scan > PC] KeyRegister the save destination computer and type of scan in or .Press .Use / to select , and press .Select .Select PC1> or PC2>, and press .Select the key to which you want to register settings.Select the type of connection that is used between the machine and computer, and press .Select this setting to erase registered settings.Select this setting if the machine and computer are connected via USB.Select this setting if the machine and computer are connected via a network.Select the destination computer, and press .This screen is not displayed if you select in step 5.Registering Your Settings in the [Scan > PC] Key123456㻞㻡㻠㻌㻛㻌㻢㻣㻢
