0AWU-00LNOTEIf the machine is not connected to the network properly:The IP address is displayed as "0.0.0.0".When the startup time setting is specified:The IP address, subnet mask, and gateway address will be displayed when the specified time has elapsed.e-Manual -> "Setting a Wait Time for Connecting to a Network"When the machine is connected to a switching hub:The machine may not be able to connect to a network even if your network settings are appropriate. In this case, thestartup time of the machine needs to be set to a waiting state.e-Manual -> "Setting a Wait Time for Connecting to a Network"Confirming IPv4 address settings1Press or (Status Monitor).2Press [ ] or [ ] to highlight , and then press .3Press [ ] or [ ] to highlight , and then press .4Press [ ] or [ ] to highlight the option you want to confirm, and then press .Confirming IP Address Settings㻢㻤㻌㻛㻌㻣㻠Downloaded from ManualsPrinter.com Manuals
