|
0ALJ-098Setting the System Manager IDRegister the System Manager ID, an ID that is intended exclusively for Administrators. You can also set a PIN for the System ManagerID. If this ID is enabled, you can access and only when the System Manager IDand PIN have been entered correctly. The System Manager ID settings information is critical to the security of the machine, so makesure that only Administrators know the System Manager ID and PIN.Press .Use / to select , and press .NOTE:If the System Manager ID has already been setIf the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press . Logging on to theMachineSelect .Specify the System Manager ID and PIN.Specify the , and then specify the .Enter a number of up to seven digits using the numeric keys, and press .When is displayed, enter the PIN once again to confirm.NOTE:You cannot register an ID or PIN that consists only of zeros, such as "00" or "0000000".If you want to cancel the System Manager ID and PIN settings, clear the text box, and press .Setting the System Manager NameNOTEConfiguring settings via the Remote UIStart the Remote UI and log on in System Manager Mode. Click [Settings/Registration] [System Management] [Edit...] andspecify the necessary settings on the displayed screen.By using the Remote UI, you can register a variety of information, including contact information, Administrator comments, theinstallation location of the machine, as well as to the settings that you can register by using the operation panel. Theregistered information can be viewed on the [Device Information] page of the Remote UI. Checking System ManagerInformation1 Select , and press .2 Enter up to 32 characters for the System Manager Name, and press . Entering Text1234㻟㻥㻥㻌㻛㻌㻢㻣㻢Downloaded from ManualsPrinter.com Manuals
|
