Canon MF4100 Series Service Manual

Contents

Canon MF4100 Series Service Manual Manual pdf 129 page image

Chapter 1313-713.2.7.2 Bit 7 and 8 Elaborated 0014-6256i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /Enables to set the duration of pause.It is a combination of Bit 7 and Bit 8 and the duration is as listed below.T-13-813.2.8 SSSW-SW3713.2.8.1 Function List 0014-6257i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /T-13-913.2.8.2 Bit 1 to Bit 6 Elaborated 0014-6258i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /Enables to select the maximum baud rate in V.34 primary channel from 2400, 2800, 3000, 3200, 3429 baud.Different combinations of Bit 1 to Bit 6 lead to different baud rates as shown below.In SendingT-13-10In ReceivingT-13-1113.2.9 SSSW-SW3913.2.9.1 Function List 0014-6259i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /T-13-1213.2.9.2 Bit 7 Elaborated 0014-6260i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /Enables to choose whether or not to carry out V.8 procedure during incoming calls.Change the setting to 'No' and V.8 procedure will not be carried out and T.30 procedure will start.(Bit7, Bit8)= (0, 0) 2.0 seconds(1, 0) 2.5 seconds(0, 1) 3.0 seconds(1, 1) 3.5 secondsBit Function 1 01 V.34 Maximum Baud Rate (TX) 1 0*2 V.34 Maximum Baud Rate (TX) 1 0*3 V.34 Maximum Baud Rate (TX) 1 0*4 V.34 Maximum Baud Rate (RX) 1 0*5 V.34 Maximum Baud Rate (RX) 1 0*6 V.34 Maximum Baud Rate (RX) 1 0*7 Not in Use - -8 Not in Use - -(Bit1, Bit2, Bit3)= (0, 0, 0) 3429(1, 0, 0) 3200(0, 1, 0) 3000(1, 1, 0) 2800(0, 0, 1) 2400(Bit4, Bit5, Bit6)= (0, 0, 0) 3429(1, 0, 0) 3200(0, 1, 0) 3000(1, 1, 0) 2800(0, 0, 1) 2400Bit Function 1 01 Not in Use - -2 Not in Use - -3 Not in Use - -4 Not in Use - -5 Not in Use - -6 Not in Use - -7 V8 Procedure at Incoming Call Yes No *8 V8 Procedure at Outgoing Call Yes No *