Canon M3010 Series Service Manual

Contents

Canon M3010 Series Service Manual Manual pdf 43 page image

22 2-282-28Technical Overview > Pickup Feed System > Service Works > Notes on service worksTechnical Overview > Pickup Feed System > Service Works > Notes on service works● Initial Paper Presence Jam when PrintingWhen the Fixing Delivery Sensor (PS701) or the Paper Width Sensor (PS702) detectspresence of paper immediately before the Main Motor (M1) starts rotating, it is judged as adelivery stationary jam.● Door Open JamWhen printing is interrupted by door-open detection during printing, it is judged as a dooropen jam if there is paper at the Paper Leading Edge Sensor (PS751) or the Fixing DeliverySensor (PS701). At this time, if the jam status already indicates a jam, the jam status isretained.● Initial Paper Presence Jam during Warm-up RotationWhen the Paper Leading Edge Sensor (PS751) detects absence of paper at the start ofwarm-up rotation and the Fixing Delivery Sensor (PS701) or the Paper Width Sensor (PS702)detects presence of paper, it is judged as an initial paper presence jam.● Paper Absence Detection during CleaningOFFPickup Solenoid (SL1)Paper Leading EdgeSensor (PS751)ONOFFONJam1370msec200msecPaper Detection PeriodWhen the Paper Leading Edge Sensor (PS751) cannot detect presence of paper within 1370msec. after 200 msec. from the start of paper pickup, it is judged as paper absence.F-2-32Service Works■ At parts replacementNo work is required for this product at parts replacement.■ MaintenanceNo periodically replaced parts, durable parts or periodical service is set for this product.■ Notes on service worksNone.