Canon M3010 Series Service Manual

Contents

Canon M3010 Series Service Manual Manual pdf 127 page image

88 8-118-11Service Mode > TESTMODE > SCANService Mode > TESTMODE > SCANTESTMODESCANCanon MF3010 Service Control ToolSet up CANON MFP ( USB Service Mode)MODESCAN COPYCOPIER TESTMODE Show MEMOCanon MF3010 USM Ver.1.01USMONCloseConnectedSTATUSSelect Speed ModeStartRGB-600 DPIRGB-300 DPIRGB-150 DPIGray-600 DPIGray-300 DPIGray-150 DPIMono-600 DPIMono-300 DPIMono-150 DPISCANStart buttonSelect Speed Mode fieldSelect Speed Mode field Select a speed mode for testing.Start button Start test.F-8-12T-8-12Test in progress screenSTOP TESTPAGE COUNT 1STOP TEST buttonPAGE COUNT fieldPAGE COUNT field Display the number of reading operation.STOP TEST button Stop the test.The test is repeated until the STOP TEST button is pressed.The test continues until the job that was executed when the STOP TESTbutton was pressed ends.NOTE:By pressing the STOP TEST button, the following screen appears and the machine iswaiting for completion of the test.F-8-14TESTMODE>SCANDescriptionReading speed testPerform the driving test of the Read Motor (M3) using the specified speed mode.[Selection items]RGB-600 DPI, RGB-300 DPI, RGB-150 DPI, Gray-600 DPI, Gray-300 DPI, Gray-150 DPI,Mono-600 DPI, Mono-300 DPI, Mono-150 DPIF-8-13T-8-13T-8-14