194 Additional InformationList of Messages*/)/( Refer to List of Messages for Connecting to anExternal Hard Drive (A 200) for external hard drive related messages.Refer to List of Messages for Wi-Fi Functions (A 200) for Wi-Fi relatedmessages.(in alphabetical order)Back up recordings regularly- This message may appear when you turn on the camcorder. In the event of a malfunction,recordings may be lost so back up your recordings regularly.*/)/( Built-in memory error- The built-in memory could not be read. Contact a Canon Service Center.*/)/( Built-in memory is full- The built-in memory is full (“& End” appears on the screen). Delete some recordings(A 60, 118) to free some space. Alternatively, save your recordings (A 129) and initializethe built-in memory (A 41).*/)/( Built-in memory writing error Attempt to recover the data?- This message will appear the next time you turn on the camcorder if power supply was acci-dentally interrupted while the camcorder was writing to the built-in memory. Select [Recover]to try to recover the recordings.*/)/( Cannot access the built-in memory- There is a problem with the built-in memory. Contact a Canon Service Center.Cannot communicate with the battery pack. Continue using this battery pack?- You attached a battery pack that is not recommended by Canon for use with this camcorder.- If you are using a battery pack recommended by Canon for use with this camcorder, theremay be a problem with the camcorder or battery pack. Consult a Canon Service Center.*/)/( Cannot convert- Cannot access the memory card. Check the memory card and make sure it is inserted cor-rectly.- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card(A 36).- There was an error creating the file name. Set > [File Numbering] to [Reset] andinitialize the memory card (A 41) or delete all the photos (A 118) and converted SD mov-ies (A 60).COPY
