Canon IXUS 172 User Manual

Also see for IXUS 160: Instruction manual User guide User guide User guide

Contents

Canon IXUS 172 User Manual Manual pdf 95 page image

95Before UseBasic GuideAdvanced GuideCamera BasicsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndexBefore UseBasic GuideAdvanced GuideCamera BasicsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndexStill Images MoviesUsing an Eye-Fi CardBefore using an Eye-Fi card, always confirm that local use is permitted.Inserting a prepared Eye-Fi card enables automatic wireless transfer ofimages to a computer or uploading to a photo-sharing website.Images are transferred by the Eye-Fi card. Refer to the card’s user manualor contact the manufacturer for instructions on preparing and using cards orresolving transfer problems.• When using an Eye-Fi card, keep the following points in mind.- Cards may continue to transmit radio waves even when [Eye-Fitrans.] is set to [Disable] (=96). Remove the Eye-Fi card beforeentering hospitals, aircraft, or other areas where transmission isprohibited.- When troubleshooting image transfer issues, check the card andcomputer settings. For details, refer to the card’s user manual.- Poor Eye-Fi connections may cause image transfer to take a longtime, and transfer may be interrupted in some cases.- Eye-Fi cards may become hot, due to their transfer functions.- Battery power will be consumed faster than in normal use.- Camera operation may become sluggish. To resolve this, trysetting [Eye-Fi trans.] to [Disable].Connection status of Eye-Fi cards in the camera can be checked on theshooting screen (in regular information display mode) or playback screen (insimple information display mode).(Gray) Not connected Interrupted(Blinking white) Connecting Not communicating(White) Connected Error acquiring Eye-Fi card information* 2(Animated) Transfer in progress* 1*1 Power saving (=19) on the camera is temporarily disabled during image transfer.*2 Restart the camera. Repeated display of this icon may indicate a problem with thecard.Images labeled with a [ ] icon have been transferred.Checking Connection InformationCheck the access point SSID used by the Eye-Fi card or the connectionstatus, as needed.zz Press the <n> button, choose[Eye-Fi Settings] on the [3] tab, and thenpress the <m> button.zz Choose [Connection info], and then pressthe <m> button.zz The connection information screen isdisplayed.Downloaded From camera-usermanual.com Canon Manuals