12Before UseBasic GuideAdvanced GuideCamera BasicsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndexBefore UseBasic GuideAdvanced GuideCamera BasicsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndex3 Check the card’s write-protecttab and insert the memory card.zz Recording is not possible on memorycards with a write-protect tab when thetab is in the locked position. Slide the tabto the unlocked position.zz Insert the memory card facing as shownuntil it clicks into the locked position.zz Make sure the memory card is facing theright way when you insert it. Insertingmemory cards facing the wrong way maydamage the camera.4 Close the cover.zz Lower the cover ( ) and hold it down asyou slide it, until it clicks into the closedposition ( ).zz If the cover will not close, make sure youinserted the battery pack facing the rightway in step 2.• For guidelines on how many shots or hours of recording can be saved on onememory card, see “Number of Shots per Memory Card” (=112).Removing the Battery Pack and Memory CardRemove the battery pack.zz Open the cover and press the batterylock in the direction of the arrow.zz The battery pack will pop up.TerminalsRemove the memory card.zz Push the memory card in until it clicks,and then slowly release it.zz The memory card will pop up.Setting the Date and TimeSet the current date and time correctly as follows if the [Date/Time] screenis displayed when you turn the camera on. Information you specify this wayis recorded in image properties when you shoot, and it is used when youmanage images by shooting date or print images showing the date.You can also add a date stamp to shots, if you wish (=33).1 Turn the camera on.zz Press the ON/OFF button.zz The [Date/Time] screen is displayed.2 Set the date and time.zz Press the <q><r> buttons to choose anoption.zz Press the <o><p> buttons to specifythe date and time.zz When finished, press the <m> button.Downloaded From camera-usermanual.com Canon Manuals