Canon FY8-13HR-000 Service Manual

Canon FY8-13HR-000 Service Manual Manual pdf 80 page image

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 NM-PDL REV.0 JULY 2001CHAPTER 4 DISASSEMBLY/ASSEMBLY4-405.2.5 Connecting the iR-M1 and the PC1) Obtain the permission of the user’s administrator, and turn off the main power switch.Then, disconnect all cables.2) Connect the parallel port of the iR-M1 and the PC (to which the Download Tool hasbeen installed) with a Centronics cable.3) Turn on the PC, and start up Windows 95/98.5.2.6 Operating the iR-M11) Perform up to step 3) of 5.2.7 (Operating the PC).2) Power on the iR-M1; when the Fiery logo appears on the iR-M1 Control Panel, pressthe up botton on the front of the iR-M1.3) At the parallel boot screen on the iR-M1, select Yes.If you do not select Yes quickly enough at the parallel boot screen, recyclepower and try again.4) When the message ‘Send download’ has appeared, perform step 4) in 5.2.7 (Operatingthe PC).5) Perform setp 5) to step 6) of 5.7.2 (Operating the PC)6) At the Choose Function screen, select Instllation. A message appears informing you thatthe parallel port is flushing; wait for that process to comlpete.7) When ‘Please copy installation software to the parallel port’ appears on the iR-M1, per-form step 7) in 5.2.7 (Operating the PC).8) Select ‘OK’ on the iR-M1.9) when the installation is complete, ‘Installation was successful’ appears; select ‘OK’.10) At the choose Function screen, select Continue Boot.