Canon FY8-13HR-000 Service Manual

Canon FY8-13HR-000 Service Manual Manual pdf 20 page image

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 NM-PDL REV.0 JULY 2001CHAPTER 2 PREPARING FOR INSTALLATION2-32 Checking the Customer SiteBefore you install the iR-M1, check site conditions and inform the customer of any instal-lation requirements.2.1 Copier Model What copier model is installed? Is there space near the copier for the iR-M1?Make sure there is space for the iR-M1. You may need to move the copier out from thewall for easier access. Does the copier require service or adjustment?Copy the copier test page before you install the iR-M1.If the copied image indicates that the copier needs adjustment, inform the customer.After getting approval, complete the copier service needed.2.2 Power Is there a dedicated grounded electrical outlet near the copier for the iR-M1?Locate the grounded electrical outlet that will supply power to the iR-M1. The iR-M1and the copier should not run on the same circuit. Use a surge suppressor for the iR-M1.• Do not use a 3-prong adapter in a 2-hole ungrounded outlet.• Do not use an extension cord.• Do not plug the iR-M1 into a circuit with heating or refrigeration equipment(including water coolers).• Do not plug the iR-M1 into a switchable wall outlet. This can result in the iR-M1 be-ing turned off accidentally.