|
16Set the Machine for Receiving FaxesSelect the Receive Mode that Suits Your NeedsThe receive mode determines how the machine responds to incoming faxes and voice calls. Select the modewhich is most suitable for you from the chart below. For details, see “About the Receive Modes,” on p. 17.Receive voice call by telephonewith built-in answering machine Receive fax and/or voice call by pickingup telephone or pressing hook buttonReceive fax call only(No voice call)YESNONOYES YESNOThe remote reception function is useful when the receive mode is set to and connected to an external telephone.You can receive faxes by picking up the external telephone and pressing a two-digit remote reception ID (the default setting is25). For details, see Chapter 3, “Sending and Receiving” in the Reference Guide.Your telephone with built-in answering machine or answering machine must be connected directly to the machine for to work. (See “Connect Telephone Cables,” on p. 11.)The external telephone must be connected to the machine for or to work. (See “Connect TelephoneCables,” on p. 11.)By default, is selected in <1 RX MODE>. If external telephone is connected to the machine and receives a fax or voicecall, the external telephone rings. You can answer the voice call while the external telephone is ringing.To disable the incoming ring, press [Menu] → <5 FAX SETTINGS> → <4 RX SETTINGS> → <2 INCOMING RING> then select .Voice mail greeting is not supported with .The mode is available for certain countries only and requires subscription to a network switch service. Contact yourtelephone company for availability.––––––Set the Receive Mode1 Press [Menu].2 Press [ ] or [ ] to select <5 FAXSETTINGS>, then press [OK].3 Press [ ] or [ ] to select <1 RX MODE>,then press [OK].4 Press [ ] or [ ] to select the receivemode, then press [OK].5 Press [Stop/Reset] to return to the standbymode.The LCD display is turned off:The machine may enter the sleep mode while you are setting up themachine. Press [Energy Saver] to turn the machine back on andcontinue the setup.
|
