10Set the Date and TimeBefore using the machine, you MUST set the current date and time. The current date and time settings areused as standard timer settings for functions that require them.1 Press [Menu].2 Press [ ] or [ ] to select <8 TIMERSETTINGS>, then press [OK].3 Press [ ] or [ ] to select <1 DATE&TIMESETTING>, then press [OK].4 Use the numeric keys to enter the time (in 24-hour/military time format) and date (day/month/year), then press [OK].Ex.D A T E & T I M E S E T T I N G1 5 : 5 0 3 1 1 2 ‘ 0 7If you accidently enter an incorrect number, press [ ] or[ ] to move the cursor to the number that needscorrecting and overwrite it.5 Press [Stop/Reset] to return to the standbymode.You can select one of the following three dateformats in <2 DATE TYPE SELECT>.By default, <4 DAYLIGHT SV.TIME> in the <8 TIMERSETTINGS> menu is set to .If you want to set <4 DAYLIGHT SV.TIME> in the <8TIMER SETTINGS> menu to , see Chapter 1,“Before Using the Machine,” in the Reference Guide–––––The LCD display is turned off:The machine may enter the sleep mode while you are setting up themachine. Press [Energy Saver] to turn the machine back on andcontinue the setup.Entering InformationNumeric keys: Enters numbers.[ ] or [ ]: Moves the cursor position.[OK]: Confirms the entry.Set Up the Machine