95In Basic Zone modes, the camera will normally focus the closest subjectautomatically. Therefore, it may not always focus on your target subject.In the <d>, <s>, <f>, and <a> modes, you can select the AFpoint and use it to focus on the target subject.1 Press the <S> button. (9)X The selected AF point will bedisplayed on the LCD monitor and inthe viewfinder.2 Select the AF point.Use the <S> cross keys to selectthe AF point.While looking through the viewfinder,you can select the AF point by turningthe <6> dial until the desired AFpoint lights up in red.When all the AF points light up,automatic AF point selection will beset. The AF point will be selectedautomatically to focus on the subject.Pressing <0> toggles the AF pointselection between the center AF pointand automatic AF point selection.3 Focus on the subject.Aim the selected AF point over thesubject and press the shutter buttonhalfway to focus.S Selecting the AF PointNCOPY
