57Recording VideoRear Panel DisplaysYou can check the following information on the rear panel. This allows you to easily adjust main camera functionslike the shutter speed, white balance and ISO speed/gain even when the monitor unit is not attached to thecamera without having to use the viewfinder.1 Displayed also in mode.2 In these shutter speed modes, only the denominator is displayed - indicates a shutter speed of 1/100, etc.3 Only displayed while adjusting the setting.4 Only when an optional WFT-E6 Wireless File Transmitter is connected to the camera.12345 6 7 8 9101112131 White balance (A 76)2 Time code settings: NDF Non-drop frame (A 85) /EXT-LOCK External time code signal locked(A 89) / HOLD Time code display on hold (A 85)3 Time code (A 84)4 Audio level meter1 (A 94, 95)5 White balance fine-tuning (A 76)6 ISO speed/ Gain (A 70)7 Shutter speed (A 67)/White balanceShutter speed2 (mode set to [Speed], [Slow]or [Off])Shutter speed (mode set to [Angle])Shutter speed (mode set to [Clear Scan])White balance fine-tuning3 (A 76)White balance, color temperature3 (A 77)8 2 Aperture value (A 74)9 ND filter (A 73)10 RAW output (A 60)11 Approximate remaining battery time112 Wi-Fi 4 (A 49)13 CF card status and available recording time 1Adjusting the Brightness of the Rear PanelRepeatedly pressing the (backlight) button will change the brightness ofthe rear panel in the following order: Backlight on (bright) Backlight on(dim) Backlight off.COPY
