Displaying the Status Screens180Displaying the Status ScreensYou can use the status screens to check the camera’s various recording- and playback-related settings. You canalso output the status screens on an external monitor.1 Press the STATUS button.• The status screen most recently displayed will appearunless you turned off the camera or changed the operatingmode. In such case, the [Camera] status screen appears inmode and the [Assign Button 1/2] status screenappears in mode.2 Push the joystick up/down or use the SELECT dial toscroll through the status screens.3 When you are finished, press the STATUS button againto exit the status screens.• Alternatively, you can press the MENU or CUSTOMPICTURE button. Doing so will exit the status screen andopen the respective menu.,1 2 only.2 Does not appear in the [Photos] index screen.3 These screens appear only after a custom picture file has been selected.4 These screens appear only when the optional WFT-E6 Wireless File Transmitter is attached to the camera and an active accesspoint has been activated with the [w Other Functions] > [Wi-Fi Remote] setting.Operating modes:Status screen Description A[Gamma/Color Space] Displays the output settings for each terminal. Also displays thegamma and color space settings of the video on the screen and thevideo to be recorded on a CF card.Ü – 181[Camera] Displays settings related to recording, such as ISO speed/gain, iris 1and shutter speed increments, peripheral illumination correction 1 andattached lens model information 1 .Ü – 181[Assign Button 1/2],[Assign Button 2/2] Allows you to verify the current function of each assignable button. Ü Ü 181[Audio] Displays settings related to audio. Ü Ü2 182[Media] Displays information about the recording media. Ü Ü 182[4K/2K/MXF 1/2],[4K/2K/MXF 2/2] Displays the settings for the video terminals and for MXF clips. Ü – 183[Video] – Ü[Metadata 1/2], [Metadata 2/2] Displays the user memo and other metadata that will be recordedwith clips. Ü – 183[Battery/Hour Meter] Allows you to check the remaining battery time, battery life and howlong the camera has been in operation. Ü Ü 184[/ Data 1/3], [/ Data 2/3],[/ Data 3/3]3Displays the settings for the custom picture file that will beembedded into clips. Ü – 184,185[Wi-Fi Remote 1/4] to[Wi-Fi Remote 4/4]4Displays settings related to the configuration of the optional WFT-E6Wireless File Transmitter and the Wi-Fi network setup. For moredetails, download the “WFT-E6 Wireless File Transmitter - Guide forCanon Camcorders” (PDF file) from your local Canon Web site andfollow the instructions to complete the necessary setup.Ü – –COPY
