50Before You StartYou can change the auto power-off time for the camera to turn offautomatically after a certain period of non-operation. If you do not wantthe camera to turn off automatically, set this to [Off]. After the powerturns off, you can turn on the camera again by pressing the shutterbutton or other button.1 Select [Auto power off]. Under the [5] tab, select [Autopower off], then press <0>.2 Set the desired time. Select the desired setting, then press<0>.You can set how long the image is displayed on the LCD monitorimmediately after capture. To keep the image displayed, set [Hold]. Tonot have the image displayed, set [Off].1 Select [Image review]. Under the [1] tab, select [Imagereview], then press <0>.2 Set the desired time. Select the desired setting, then press<0>.3 Setting the Power-off Time/Auto Power Off3 Setting the Image Review TimeEven if [Off] has been set, the LCD monitor will turn off automatically after30 min. to save power. (The camera’s power does not turn off.)If [Hold] is set, the image will be displayed until the auto power off time elapses.
