Canon EOS 400D Digital Instruction Manual

Also see for EOS 400D Digital: Instruction manual Owner's manual Instruction manual Install guide Instruction manual

Contents

Canon EOS 400D Digital Instruction Manual Manual pdf 31 page image

31The camera can operate only after the power switch is turned on.<1> : The power lamp lights, and thecamera turns on.<2>: The camera is off and does notoperate. Set to this positionwhen not using the camera.By adjusting the viewfinder to suit your eyesight, you can see a sharpviewfinder image even without eyeglasses.Turn the dioptric adjustmentknob.Turn the knob left or right so that thenine AF points in the viewfinder looksharp.How to ShootPower SwitchAdjusting the Viewfinder ImageWhen the power switch is turned on or off, the < > icon is displayedon the LCD monitor to indicate that self-cleaning sensor system isoperating.To save battery power, the camera turns off automatically after about 30seconds of non-operation. To turn on the camera again, just press theshutter button.You can change the auto power-off time with the menu’s [c Autopower off] setting. (p.95)If you set the power switch to <2> while the image is being recordedto the CF card, [Recording ...] will be displayed and the power will turnoff after the CF card finishes recording the image.If the camera’s dioptric adjustment still cannot provide a sharp viewfinderimage, using Dioptric Adjustment Lens E (10 types, optional) isrecommended.