Canon DR-6010C Easy Start Manual

Also see for imageFormula DR-6010C: Brochure & specs Brochure & specs User manual Specifications Reference guide

Canon DR-6010C Easy Start Manual Manual pdf 1 page image

Easy Start Guide☞ Continued on back sidePUB. CE-IE-717 © CANON ELECTRONICS INC. 2009Thank you for purchasing the Document Scanner DR-6010C. The manuals for this scannerinclude the Easy Start Guide (this manual) and Reference Guide (provided with the scanner,)and the User Manual and CapturePerfect 3.0 Operation Guide (electronic manuals stored onthe setup disc.) Before using the scanner, read each manual throughly to familiarize youreselfwith its capabilities, and to make the most of its many functions. After reading these manuals,store them in a safe place for future reference.Easy Start Guide (this manual)Describes the procedures for setting up the scanner and instaling thesoftware. Follow the steps in this guide to set up the scanner quickly.Reference GuideProvides an overview of the most important features and points that theuser should know when using the scanner. For more details, refer to theUser Manual.User Manual (electronic manual)Consists of a “Hardware” volume and a “Software” volume.The “Hardware” volume explains all topics related to handling and caringfor the scanner (i.e., setup, cleaning, maintenance, and troubleshooting.)The “Software” volume explains the ISIS/TWAIN driver settings and JobRegistration Tool settings.CapturePerfect 3.0 Operation Guide (electronic manual)Explains the application that enhances the operation of all Canondocument scanners.Checking the Package ContentsWhen you unpack your scanner, make sure all of the following accessories are included.If any of the items listed below are missing or damaged, contact your local authorized Canondealer or service representative.The electronic manuals are PDF (Portable Document Format) files, and are installedin the following folders during software installation. (☞ STEP 3)User Manual CapturePerfect 3.0 Operation GuideNote■ Trademarks• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also betrademarks or registered trademarks in other countries.• imageFORMULA is a trademark of CANON ELECTRONICS INC.• Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporationin the United States and/or other countries.• Other brands and product names used in this manual may be trademarks or registered trademarks of theirrespective companies.Note● Items included in this package are subject to change without notice.● Keep the package and packing materials for storing or transporting the scanner.Removing the Packing MaterialsAfter unpacking the scanner, perform the following steps to remove all the orangetape and protective materials from it.After checking the package contents, you need to remove all thepacking materials protecting the scanner. (☞ STEP 2)1. Peel off the orange tape from all the places on the outer casing marked below.2. Carefully open the document feed tray and protective sheet.DocumentFeed Tray3. Peel off the orange tape from all the places marked below.4. Carefully open the upper unit until it stops (11111), and then remove the protectivesheet (22222).5. Check that all the protective tape and protective sheets have been removed, andthen install the roller unit and retard roller in their designated locations.Roller UnitRetard Roller5-1 Follow the steps below to install the roller unit in the upper unit.1. Flip the lock lever down (1), and slide it to the right (2).2. Load the roller unit so that its notch aligns with the shaft pin on the scanner.3. Slide the lock lever to the left (1), and then lift the roller unit into place (2).4. Flip the lock lever up to lock the roller unit.Installing the SoftwareInstall the software before connecting the scanner to the computer.5-2 Follow the steps below to install the retard roller on the inside of the roller cover.1. Remove the roller cover by placing a finger under both ends and pulling upward.2. Flip up the retard roller lock lever (1), and slide it to the right (2).3. Load the retard roller so that its notch aligns with the shaft on the scanner.4. Slide the lock lever to the left so that its shaft fits into the retard roller (1), and then flipthe lock lever completely down to lock the retard roller (2).5. Attach the roller cover. Make sure the roller cover locks into place by pressing it in thecenter with your finger until you hear it click.6. Gently close the upper unit. Make sure it is closed securely by pushing on bothedges until you hear a click.The scanner is now ready for use.Next, you need to install the scanner software. (☞ STEP 3)❏ Before installing the software, make sure your computer is correctly running one ofthe following versions of Windows. For details, refer to the Reference Guide.• Microsoft Windows 2000 Professional SP4 or later• Microsoft Windows XP Professional SP3 or later• Microsoft Windows XP Home Edition SP3 or later• Microsoft Windows XP Professional x64 Edition SP2 or later• Microsoft Windows Vista Home basic, Home Premium, Business, Ultimate orEnterprise SP1 or later❏ Do not connect the scanner to the computer before installing the software. If youconnect the scanner and turn it ON before you install the software, a wizard screenwill appear. If this wizard appears, click [Cancel] to exit the wizard, and then turnthe scanner OFF.Wizard Screen (Windows Vista)❏ Close all other applications before installing the software.Warning1. Log on to Windows with Administrator privileges.2. Insert the DR-6010C Setup Disc into thecomputer’s CD-ROM drive.The setup menu automatically starts upwhen you insert the CD-ROM into the CD-ROM drive. If the setup menu does not startup, run the setup.exe application on theCD-ROM.The setup menu consists of the following screens:Menu ScreenRead Manuals Custom InstallationTypical Installation* Installs only the selected software.* Installs all of the software displayed.* The User Manual and CapturePerfect 3.0Operation Guide electronic manuals for thescanner are installed on the computer withthe rest of the software.3. Click [Typical Installation].[Typical Installation] installs the software(scanner driver, CapturePerfect 3.0) and theUser Manual. The CapturePerfect 3.0Operation Guide is installed on thecomputer during the CapturePerfect 3.0installation.4. Click [Install].The scanner driver installation wizardappears. This operation installs both thescanner driver and the Job Tool.5. Click [Next].6. Read the software license agreement, andclick [Yes] if you consent to its conditions.Installation of the scanner driver starts.The Job Tool is installed after the scannerdriver.7. Click [Finish] to complete the installation.Next, the installation wizard forCapturePerfect 3.0 appears.8. Click [Next].Warranty CardAdobe Acrobat Setup DiscEasy Start Guide(This Manual)DR-6010C Power Cord USB CableDR-6010C Setup DiscReference GuideJob LabelsRetard Roller Roller UnitRegistration Card

/ 2

Related manuals for Canon imageFormula DR-6010C