Canon DP-V2730 Operation Manual

Also see for DP-V1830: Setup guide Operation guide

OSD Menu42Sub Menu Setting Options (Bold: factory default)Aspect (SD-SDI) Automatic16:94:3Sets the size for displaying SD-SDI signal images.[Automatic]: Automatically determined based on payload.[16:9]: Images are displayed with an aspect ratio of "16:9".[4:3]: Images are displayed with an aspect ratio of "4:3".• When the following functions are activated, [4:3] is selected.- Peaking- False Color- Range CheckVideo Position(Multi View)TopMiddleCenterWhen using [Multi View (Quad)], [Multi View (Dual)], or [Single Input DualView]Sets the vertical display position for the image.[Top]: Displays at the top of the screen.[Middle]: Displays at the top middle of the screen.[Center]: Displays at the middle of the screen.Zoom Enlarges part of the video image. The zoom function can be used when the resolution is [4096x2160],[3840x2160], [2048x1080] or [1920x1080].• The zoom function cannot be used in the following cases:- During execution of [Playback File] under [Screen Capture]- During display of the test pattern- When [Multi View (Quad)], [Multi View (Dual)] or [Single Input Dual View] is selected- When [Channel Settings] [Input Configuration] [HD/SD-SDI]- When [Picture Function Settings] [Compare View] [Enable] is set to [On]• While the zoom function is in use, the various markers are not displayed.• When zoom settings are changed, [Frame Hold] turns [Off].Zoom Preset Zoom 1Zoom 2Zoom 3OffSets the zoom display method. There are three presets.Magnification x2x4x8Sets the display scale of zoom.Position The zoom adjustment screen is displayed. Use the jog dial to adjust thedisplay position.Frame Hold On, Off Pauses the video.• If the image quality setting is changed while the video is paused, the setting maynot change correctly.• In the case of an interlaced signal, the video pauses in either field (odd or even).