44 ShootingReviewing an Image Right after ShootingRight after a shot is taken, the image appears in the LCD monitor for 2seconds even if you release the shutter button regardless of whether the LCDmonitor is on or off. You can also review it with the following procedures.• By keeping the shutter button pressed after a shot.• By pressing the button while the image is displayed on the LCDmonitor. Press the shutter button halfway to stop displaying it.• You can do the following while the image is displayed.- Check the image brightness in the histogram (p. 32).- Erase the image (p. 87).- Zoom the image in the display (p. 75).Changing the Review DurationThe default review time is 2 seconds.The review function can be set to Off or changed to any time in therange of 2 to 10 seconds in one-second increments.• See Selecting Menus and Settings (p. 37).• Use the or button to select [Off],or a time from [2 sec.] to [10 sec.].• With the Off option, the image will notautomatically display. However, if youkeep the shutter button fully pressedafter a shot, the image will display.• In the [2 sec.] to [10 sec.] range, theimage will continue to display for thespecified time even if the shutterbutton is released. You can display theimage for longer than the set durationby keeping the shutter button pressedall the way.• Another picture can be taken evenwhile the last is displayed.• The display will return to the Rec. screen.In the (Rec.) menu,select .
