30 Basic FunctionsReplay Mode ( on the mode switch)• The LCD monitor will turn on when themode switch is set to the position.• In replay mode, pressing thebutton cycles the information viewmode each time the button is pressed.Single Image Replay (p. 74)Standard Detailed No DisplayMulti Image Replay (9 Images) (p. 76)Standard No DisplayInformation Displayed on the LCD MonitorShooting ModeIn shooting mode, information about the current settings andremaining image capacity will display on the LCD monitor forapproximately six seconds when the actions below are taken,regardless of whether the LCD monitor is set to On or Off.• The power is turned on.• The , , / , / or button ( mode) is pressed.• The camera settings are changed.• The Set up menu is closed.While this information is displayed, you may set the flash,continuous mode, self-timer, macro and infinity settings.• After you press the shutter button and take a shot, therecorded image appears on the LCD monitor for 2 - 10seconds (1-second increments). It will continue to display ifyou press the button while it is shown on the screen. SeeChanging the Review Duration (p. 44) .• While a recorded image is displayed on the LCD monitor,you can check the exposure with the graph (see Histogram,p. 32) that shows the distribution of the brightness data.(Press the button if the histogram and otherinformation is not shown) If the exposure requiresadjustment, set the exposure compensation and reshoot.▼▼▼▼▼
