Shooting 67Setting the White BalanceSetting the white balance to match the dominant light source whenshooting will adjust the image coloring to the correct settings for thattype of light. Set the white balance mode to a natural or artificial lightsetting according to the circumstances.Auto The camera sets the white balance automaticallyaccording to shooting conditions.Daylight For recording outdoors on a bright day.Cloudy For recording under overcast, shady or twilight skies.Tungsten For recording under tungsten and bulb-type 3-wavelength fluorescent lighting.Fluorescent For recording under warm-white, cool-white or warm-white (3-wavelength) fluorescent lighting.Fluorescent H For recording under daylight fluorescent, or daylightfluorescent-type 3-wavelength fluorescent lighting.Custom For setting a custom value with a white sheet of paper, etc.,to obtain the optimal white balance for the conditions.• Press the button repeatedly untilthe White Balance Settings menudisplays.• Use the or button to select asetting. (See the next page for .)• You can confirm the effect of thesetting in the LCD monitor when theLCD monitor is on.• A shot can be taken immediately after.The menu will reappear after the shot,allowing you to further adjust thesetting.• This setting cannot be adjusted when the (Sepia) or(B/W) photo effects are selected.
