Canon DC410 Instruction Manual

Also see for DC411: Instruction manual

Contents

Canon DC410 Instruction Manual Manual pdf 53 page image

Photos • 53Image Jump FunctionWhen you have recorded a large numberof still images, you can jump 10 or 100images at a time.1 Press to display the joystickguide.2 Push the joystick ( ) toward .3 Select ( ) [ JUMP 10 IMAGES]or [ JUMP 100 IMAGES].4 Jump ( ) the number of imagesselected and press .Press again to hide the joystickguide.Index Screen1 Move the zoom lever toward W.The still images index screenappears.2 Select ( , ) an image.• Move the green selection frame tothe image you want to view.• When you have recorded a largenumber of still images, you mayfind it easier to browse entire indexpages instead. Move the zoomlever toward W to extend the greenselection frame to the whole page,and move ( ) between indexpages. Move the zoom lever towardT to return to moving betweensingle images.3 Press .The index screen closes and theselected image is displayed.IMPORTANT• Observe the following precautions whilethe card access display ( ) appearson screen, and while the CARD accessindicator is on or flashing. Failing to doso may result in permanent data loss.- Do not subject the camcorder tovibrations or strong impacts.- Do not open the memory card slotcover and do not remove the memorycard.- Do not disconnect the power source orturn off the camcorder.- Do not change the position of the/ switch or the operating mode.• The following may not be displayedcorrectly.- Images not recorded with thiscamcorder.- Images edited on a computer.- Images whose file names have beenchanged.Magnifying Photos during PlaybackDuring playback, still images can bemagnified up to 5 times. will appearfor images that cannot be enlarged.1 Move the zoom lever toward T.• The image is magnified by 2 timesand a frame appears indicating theposition of the magnified area.( 19)Downloaded From VideoCamera-Manual.com Manuals