Chapter 44-274) Press the OK key to register the A4 width.5) Move the tray side guide to the index A5R.6) Touch [TRY-A5R] to highlight.7) Move the tray side guide to the index A5R.8) Press the OK key to register the A5R width.9) Press the Reset key twice to end service mode.10) Turn off the host machine's control panel power switch and main power switch insequence.11) Turn on the host machine's main power switch.2. Inch-Configuration1) Turn on the host machine, and start its service mode.Press the User Mode key, and press the 2 and 8 keys at the same time; then, press the UserMode key once again.2) Touch the following in sequence on the screen to bring up the Adjustment screen:FEEDER>FUNCTION>TRY-LTR.3) Move the tray side guide to the index LTR/11x17.4) Press the OK key to register the LTR width.5) Touch [TRY-LTRR] to highlight.6) Move the tray side guide to the index STRM/LTRR/LGL.7) Press the OK key to register the LTRR width.8) Press the Reset key twice to end service mode.9) Turn off the host machine's control panel power switch and main power switch insequence.10) Turn on the host machine's main power switch.4.3.1.5 Eliminating the Tilt 0003-1846Be sure you have adjusted the angle of the ADF before starting the followingadjustment:
