Canon 2541C001 Operation Manual

Setting Page5137When set to [Enable], audio data transmission will pause while there is no sound input from the camera. This can reduce theload on the network used.[Audio Reception from Viewer]Select to receive audio from Camera Viewer and RM Viewer.Received audio can be output from a speaker with an amplifier connected to the camera.Sound Clip Upload 1 to 3You can upload up to three sound clips for playback when an event is triggered.NoteThe sound clip is used when audio playback is set in [Event] > [External Device Input] (P. 150) or [Event] > [Intelligent Function] > the[Event] tab (P. 178).[Browse File]Specify the sound clip to upload and click [Add].To be able to upload a sound clip, it must satisfy the following requirements.• Playback length: Less than 20 seconds• File Format: “.wav” (μ-law PCM 8bit. Sampling frequency 8000 Hz, monaural)If it is blank when you click [Apply], the sound clip registered in the camera will be deleted.To delete an uploaded sound clip, click [Delete] next to the name of the sound clip.[Sound Clip Name]Enter the name of the sound clip to upload.Be sure to enter the sound clip name.HM4x H730NetworkHM4x H730