Canon 1064C001 Operation Manual

Also see for 1064C001: Installation guide

192For Auto Tracking, set the detection area for moving objects while checking the video on the computer screen. The camerais controlled so that the detected moving object appears near the center of the video display area. You can also set whichoperations (such as e-mail notification, recording video, or playing audio from the speaker connected to the camera) arecarried out when detection occurs.Setting Auto TrackingUse the following steps to set Auto Tracking.For details on how to adjust presets, please refer to “Registering a Preset” (P. 131).If you select [Specify the initial camera position], the camera angle will be moved to the selected preset position.The camera angle will also be moved to the selected preset position after Auto Tracking ends.NoteYou can select presets that meet the following conditions.– Presets configured within the view restrictions.– Presets with pan, tilt and zoom setting values (not blank) configured in [Preset Registration] (P. 132).[Event] > [Intelligent Function]- Auto Tracking - R13 R12The following settings can be configured here.• Operation Mode• Display Options• Camera Position Settings1 Obtain camera control privileges to set Auto Tracking (P. 67).2 Select [Specify the initial camera position] in [Camera Position Settings] as necessary, then select a preset.ImportantIt is recommended that you select [Specify the initial camera position] and configure the camera to begin auto tracking from aspecified position.