Canon VB-M50B Installation Manual

Also see for 1064C001: Operation guide

The contents of this guide are subject to change without anyprior notice.CANON INC.30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, JapanCANON EUROPA N.V.Bovenkerkerweg 59, 1185 XB Amstelveen, The NetherlandsNetwork Camera Installation GuidePlease be sure to read the “Safety Precautions” section for correct use. Afterreading this Installation Guide, keep it in a readily accessible location forfuture reference. This camera is for indoor use only.* Some cameras are not available in certain countries or regions.Caution Request a professional installer for all installation work. Never tryto install the camera yourself. Doing so may result in unforeseenaccidents such as dropping the camera or electric shock.Check Included ItemsCamera Installation Guide (This document)Setup CD-ROM Warranty CardPower connector (Straight screw-in type)Power connector (L-shape screw-in type)AccessoriesThe following accessories can be purchased separately as necessary. Some accessories are notavailable in certain countries or regions.Canon AC Adapter PA-V18Dedicated AC adapter for this camera.ENGLISHBIE-7186-000© CANON INC. 2017 Printed in JapanPart NamesSerial_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _MAC_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _23 41 5 6 7 8 9101. LED (Blue)*1 / 2. Memory card cover / 3. Lens / 4. Camera head / 5. External Device I/O Terminals /6. Audio output terminal (LINE OUT) / 7. Audio input terminal (common LINE IN and MIC IN) /8. Power connection terminal / 9. 100Base-TX LAN connector / 10. Fixing screw hole for tripod* 2*1 On: when powered on, during reboot, during normal use / Off: when [Turn Off] is selected (pleaserefer to the “Operation Guide”)*2 Screws are no longer than 5.5 mm (0.22 in.), and 1/4-20 UNC-compliant.External Dimensions129 (5.08)157 (6.18)113 (4.45)(when lens is horizontal)163 (6.42)(when lens is fully vertical)90°R56 (R2.20)(possible range of motion)29.8 (1.17)15°Unit: mm (in.)Symbols Indicating Safety PrecautionsThis Installation Guide uses the following symbols to indicateimportant information the user should know in order to use theproduct safely. Explanations are provided for each symbol sothat users will understand the level of importance for each. Besure to observe these items.Warning Failure to follow the instructions accompanied bythis symbol may result in death or serious injury.Caution Failure to follow the instructions accompaniedby this symbol may result in injury.Caution Failure to follow the instructions accompaniedby this symbol may result in property damage.Safety PrecautionsInstallation PrecautionsWarningDo not install in the following places:• Places in direct sunlight, near heat-generating objects, or locationssubject to high temperatures• Places near fire sources or flammable solvents (alcohol, thinner, fuel, etc.)• Humid or dusty places• Places subject to oily smoke or steam• Places subject to sea airFailure to do so may result in fire or electric shock.Notes on Power Supply• Only use the dedicated AC adapter (sold separately) for AC power.• Do not set any heavy objects on the power cable (or the LAN cable for aPoE power supply).• Do not pull, forcibly bend, scratch, or modify the power cable (or the LANcable for a PoE power supply).• Do not cover or wrap the AC adapter (sold separately) with cloth orblankets.Failure to do so may result in fire or electric shock.CautionFor installation or inspection of this camera, consult the dealerwhere you purchased the product.• This installation should be made by a qualified service person andshould conform to all local codes.• When installing, make sure the surface is capable of withstanding thetotal weight of the camera and accessories, and sufficiently reinforce ifnecessary.• Do not install in unstable places, places subject to significant vibration orimpact, or places subject to salt damage or corrosive gas.Failure to do so may result in the camera falling or other accidents.• Do not touch the edges of metal parts with bare hands.• Be careful not to get your fingers caught when installing.Failure to do so may result in injuries.Caution• Do not hold the device by the camera head.• Never touch the camera head during initialization.• Do not turn the camera rotator by hand.• Do not install on an unstable surface. Also, make sure the camera isinstalled ±5° or less horizontal.• After turning off the power, do not turn the power on again for at least fiveseconds.• Take measures to remove static electricity before performing anyprocedures.• If there is condensation, please wait to power on until the condensationdissipates.Failure to do so may result in malfunctions.• Take care not to damage wiring or piping.Failure to do so may result in damage to peripheral items.Important• We recommend the installation of a lightning arrester (a surgeprotection device) as a measure against failures caused bylightning strikes. Please refer to our website for details.Precautions for UseWarning• If you discover defective conditions such as smoke, strange sounds,heat or strange odors, immediately stop using the camera and contactyour nearest dealer.Fire or electric shock may result from continued use of the product.• If thunder starts, stop installation or inspection etc. and do not touch thecamera or continue connecting the cable.• Do not disassemble or modify the camera.• Do not damage the connecting cable.• Do not spray the camera with water, or otherwise make it wet.• Do not insert foreign objects such as water or metal into the camera.• Do not use flammable sprays near the camera.• Do not leave LAN cables, external power supply, or the power connectorfor the AC adapter (sold separately) connected when the camera is notin use for long periods.• Do not use flammable solvents such as alcohol, paint thinner or benzinewhen cleaning the camera.Failure to do so may result in fire or electric shock.Before Installing the CameraSet the IP address and other network information on thecamera using the “Camera Management Tool” on the SetupCD-ROM.For details on how to operate the “Camera Management Tool”,please refer to the “Camera Management Tool User Manual”.Using a Memory CardMemory card cover Memory card slotRemove the memory card coverPlace your fingers on the left and right edges of the memorycard cover and pull to remove. To return the memory cardcover to the camera, use the same procedure in reverse.Place the memory card in the memory card slot.To remove the memory card, push it in all the way until the cardslightly pops out and remove.Important• Insert a memory card before installing the camera.• When using a memory card with the camera for the first time,it is recommended to format the card after inserting it into thecamera (please refer to the “Operation Guide”).• Always unmount the memory card before removing it (pleaserefer to the “Operation Guide”).Only for European Union and EEA (Norway, Iceland and Liechtenstein)These symbols indicate that this product is not to be disposed of with your household waste, according to theWEEE Directive (2012/19/EU), the Battery Directive (2006/66/EC) and/or national legislation implementing thoseDirectives.If a chemical symbol is printed beneath the symbol shown above, in accordance withthe Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium,Pb = Lead) is present in this battery or accumulator at a concentration above anapplicable threshold specified in the Battery Directive.This product should be handed over to a designated collection point, e.g., on anauthorized one-for-one basis when you buy a new similar product or to an authorized collection site for recyclingwaste electrical and electronic equipment (EEE) and batteries and accumulators. Improper handling of thistype of waste could have a possible impact on the environment and human health due to potentially hazardoussubstances that are generally associated with EEE. Your cooperation in the correct disposal of this product willcontribute to the effective usage of natural resources.For more information about the recycling of this product, please contact your local city office, waste authority,approved scheme or your household waste disposal service or visit www.canon-europe.com/weee, or www.canon-europe.com/battery.

/ 2

Related manuals for Canon 1064C001