Campbell Hausfeld DG480000CK Operating And Parts Manual

Also see for DG480000CK: Operating instructions

Contents

Campbell Hausfeld DG480000CK Operating And Parts Manual Manual pdf 1 page image

Manual de Instrucciones y Lista de Piezas16 SpDetail SanderOperating Instructions and Parts Manual DG480000CKDescriptionDetail sanders are designed foruniform sanding and polishing incorners and tight spaces. Ideal for flushsanding along edges This sander has abuilt-in dust port for vacuum or dustbag attachment.UnpackingWhen unpacking this product, carefullyinspect for any damage that may haveoccurred during transit.General SafetyThis manual contains information that isvery important to know and understand.This information is provided for SAFETYand to PREVENT EQUIPMENT PROBLEMS.To help recognize this information,observe the following symbols.Danger indicatesan imminentlyhazardous situation which, if notavoided, will result in death or seriousinjury.Warning indicatesa potentiallyhazardous situation which, if notavoided, could result in death or seriousinjury.Caution indicates apotentiallyhazardous situation which, if notavoided, may result in minor or moderateinjury.Notice indicatesimportantinformation, that if not followed, maycause damage to equipment.CALIFORNIA PROPOSITION 65Youcancreate dust when you cut,sand, drill or grindmaterials such as wood,paint, metal, concrete,cement, or other masonry. This dustoften contains chemicals known tocause cancer, birth defects, or otherreproductive harm. Wear protectivegear.! DANGERNOTICE! CAUTION! WARNING! DANGERThis product or itspower cordcontains chemicals known to the Stateof California to cause cancer and birthdefects or other reproductive harm.Wash hands after handling.The following safety precautions must befollowed at all times along with anyother existing safety rules.1. Read all manualsincluded with thisproduct carefully. Bethoroughly familiar withthe controls and theproper use of the equipment.2. Only persons well acquainted withthese rules of safe operation shouldbe allowed to use the tool.Safetyglasses and ear protectionmust be worn duringoperation.3. Do not wear loose fitting clothing,scarves, or neck ties in work area.Loose clothing may become caughtin moving parts and result in seriouspersonal injury.4. Do not wear jewelry whenoperating any tool. Jewelry maybecome caught in moving parts andresult in serious personal injury.! WARNING! WARNINGIN714300AV 3/065. Always use attachments designedfor use with this tool. Do not usedamaged or worn attachments.6. Never trigger the tool when notapplied to a work object.Attachments must be securelyattached. Loose attachments cancause serious injury.7. Never point a tool at oneself or anyother person. Serious injury couldoccur.8. Use steady, even pressure whenusing tool. Do not force. Too muchpressure can cause tool to overheat.9. Keep all nuts, bolts and screws tightand ensure equipment is in safeworking condition.10. Do not put hands near or undermoving parts.© 2006 Campbell Hausfeld/Scott FetzerMANUALBUILT TO LASTPlease read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/orproperty damage! Retain instructions for future reference.REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.See Warranty on page 5 for important information about commercial use of this product.For parts, product & service informationvisit www.chpower.comSpecificationsToolVoltage 120V 60HzPower Rating 0.8 ASanding Surface 140 x 140 x80 mmWeight 2 lbs.NotesNotesNotas