Chapter 3: System planning Security planningPage 3-48Table 83 Ports filtered per protocol selectionsPort Configuration450 Platform Family supports access to various communication protocols and only the ports required forthese protocols are available for access by external entities. Operators may change the port numbers forthese protocols via the radio GUI or SNMP.Table 84 Device default port numbersPort Usage Port Usage Device21 FTP Listen Port AP, SM80 HTTP Listen Port AP, SM443 HTTPS Listen Port AP, SM161 SNMP port Listen Port AP, SM162 SNMP trap port Destination Port AP, SM514 Syslog Server port Destination Port AP, SM1812 Standard RADIUS port Destination Port AP1813 Standard RADIUS accounting port Destination Port AP, SMProtocol Selected Port Filtered (Blocked)SMB Destination Ports UDP : 137, 138, 139, 445, 3702 and 1900Destination Ports TCP : 137, 138, 139, 445, 2869, 5357 and 5358SNMP Destination Ports TCP and UDP : 161 and 162Bootp Client Source Port 68 UDPBootp Server Source Port 67 UDPUser Defined Port 1..3 User defined ports for filtering UDP and TCPIPv4 Multicast Block IPv4 packet types except other filters definedIPv6 Multicast Block IPv6 packet types except other filters definedARP Filter all Ethernet packet type 806Upstream Applies packet filtering to traffic coming into the FEC interfaceDownstream Applies packet filtering to traffic destined to exit the FEC interface
