Cambium Networks PTP 670 Installation Manual

Also see for PTP 670 Series: User guide Quick start guide

Contents

Cambium Networks PTP 670 Installation Manual Manual pdf 6 page image

Page 6Typical deploymentA PTP 670 site typically consists of a high supporting structure such as a mast, tower or building for theoutdoor equipment (ODU and optional external antenna); and an equipment building or moisture-proofenclosure for the indoor equipment (PSU), as shown here in a typical mast or tower installation:NoteThese instructions assume that LPUs are being installed from the LPU and grounding kit(Cambium part number C000065L007A). If the installation does not require LPUs, adapt theseinstructions as appropriate.If LPUs are being installed, only use the five black-capped EMC cable glands supplied in theLPU and grounding kit. The silver-capped cable glands supplied in the ODU kits must only beused in PTP 670 installations which do not require LPUs.BuildingentryGround ringPSUFirst point of contact betweendrop cable and towerODUNetworkequipmentBottom LPUTop LPUIntermediate ground cable(s) asrequiredAC/DC SupplyEquipment building or cabinetTower ground barPTP 670 Ground cablesPower over Ethernet CAT5e cable(gel-filledshielded with copper-plated steel)Site grounding systemNetwork CAT5e cable