2017 Portable SpaLTR20171001, Rev. BCleaning and Maintenancewww.calspas.com41Cleaning and MaintenanceRemoving andReseatingthe PillowsYou can remove the pillows forcleaning and maintenance quickly andeasily. This method works for all typesof pillows.Grab the lower edge of the pillow withboth hands firmly and pull up. As youdo this, the pillow inserts will pop outof the holes.Reseat the pillows by aligning the pillowinserts with the holes and striking thepillow hard enough to insert the pegsback into the holes.Jet Removal andReplacementJets can be easily removed for cleaning.Screw-in jet removalGrasp the outer rim of the jet and turn itcounter-clockwise. The jet will unscrewfrom the fitting until it is free.To replace the jet, place it in the fittingand turn it clockwise until it is snug inplace and it can be rotated freely abouthalf a turn. Do not overtighten the jet.Snap-in SQR jet removalGrasp the outer rim of the jet and turnit counter-clockwise until it completelystops. You may feel it slightly loosen popout a bit from the fixture. Pull the jetout from the jet fixture. The jet will bevery snug and may require some force toremove it. DO NOT PRY OUT JETS.To replace any jet, place it in the fittingand turn it clockwise until it snaps in andcan be rotated freely about half a turn.Do not overtighten the jet.