Barbecue GrillsLTR50001038, Rev. CCleaning and Maintenancewww.calflamebbq.com26Light Lens with Screw ClipRemove the screw at the left or right of the1.lens.Carefully pull the lens away and out of the2.light fixture. Set the lens, screw clip, andscrew aside.Unscrew the two screws located at the side of3.the white ceramic light fixture.Using a tissue or small piece of paper, pull the4.burnt bulb out of the socket.Using a tissue or small piece of paper, carefully5.push a new bulb into the socket, making sureboth wires on the bulb go into the light socketevenly.Tighten the two screws on the side white6.ceramic light fixture.Replace the light lens by replacing the screw7.and screw clip.Snap-in Light LensUsing a small standard screwdriver, carefully1.pop out the light lens and set it aside.Using a tissue or small piece of paper, pull the2.burnt bulb out of the socket.Using a tissue or small piece of paper, carefully3.push a new bulb into the socket, making sureboth wires on the bulb go into the light socketevenly.Replace the light lens by carefully snapping it4.back in placeLight Bulb ReplacementWARNING: Never attempt to replace a light bulb when the grill is in use. Serious burns will result.WARNING: Never touch halogen bulbs with your bare fingers. Use a tissue or a small piece of paper to handlebulbs. Oils from your hands will damage halogen bulbs.Cal Flame grills use two different types of light housings. These instructions describe how to change the bulbin both types.