CAI 600 Series User Manual

Also see for 600 Series: User manual User manual

CAI 600 Series User Manual Manual pdf 34 page image

Section 7 MAIN MENUCalifornia Analytical Model 600 CLD C_ETL_US/CE Operators ManualRev12 Page 26 of 817.5.5. F5 PasswordAfter turning on the analyzer, you are in access level 1. To change the access levelor to change the passwords, press F5 (Setup) in the main menu and Press F5(Password) again. The following screen appears:Enter / Change Password7.5.5.1 F1 Enter PasswordTo change access level, press F1. The following screen appears:Access Level ScreenF1 to F4 selects an access level. Move the cursor to the access level to bemodified. You must enter the correct password for the access level desired.The passwords for the various operation levels consist of three numbers thatmust to be entered on the numeric keypad. If the code word is incorrect, youare asked to re-enter the codeword.+ IMPORTANT TIP: When a new analyzer is powered up, it defaults toaccess level 1 (User). To operate ALL parameters and gain complete access,select F4. Press the Enter key twice and enter 444.7.5.5.2 F2 Change PasswordThe passwords can only be changed, if you are in access level 4. After F2,enter your new 3 digit passwords.