CAB a2+ Configuration Instructions

Also see for A2+: Operator's manual Operating instructions User configuration guide

CAB a2+ Configuration Instructions Manual pdf 42 page image

42 Configuration Instructions Edition 5/06Test functionsA2+/A4+/A6+/A8+5.5 Device listThe Device list function prints out the most important information on hardware components of theprinter and connected devices. The printout occurs using the heat level and print speed specified in theSetup > Print param. menu.1. Insert printable medium (labels, endless paper) which extends across the entire printing width.2. If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximumwidth.3. Press the menu button.4. Select Test > Device list menu.5. Start printout with the ↵ button.You can cancel the printout with the cancel button.Fig. 15: Device listThe printout occurs without taking the label gaps into consideration. This is why endless media are mostsuitable for this purpose.