CAB a2+ Configuration Instructions

Also see for A2+: Operator's manual Operating instructions User configuration guide

CAB a2+ Configuration Instructions Manual pdf 19 page image

A2+/A4+/A6+/A8+Offline menuEdition 5/06 Configuration Instructions 193.2 Navigating the offline menuYou can control all settings and functions in the offline menu with the navigator pad.Fig. 5: Navigator pad⇒ Press the menu button to switch from Ready mode to the offline menu.⇒ Press the X or W button to select menu items on a menu level or to selectvalues on the parameter level.⇒ Press the W button on the top menu level several times, if necessary, toswitch from the offline menu to Ready mode.⇒ Press the S or T button to reach a higher or lower menu level or to setvalues on the parameter level.⇒ Press the ↵ button briefly to enable value selection on the parameter level,accept a selected value or start a function.⇒ Press and hold (> 2 sec.) the ↵ button to exit the parameter level withoutaccepting the parameter setting.You can also make all settings in the offline menu via the Ethernet interface (see "4.2" on Page 28) orvia direct control commands (see“Programming Manual“).