Bosch SMS67NI10M Instruction Manual

Also see for 6 Series: Instruction manual User manual Instruction manual Instructions for installation and use Instructions for installation and use

en Fault, what to do?36Fault tableFault Reason Remedial action“Check water supply”display lights up.Supply hose kinked. Install supply hose without kinks.Water supply turned off. Turn on water supply.Water supply jammed orcalcified.Turn on water supply.Flow rate must be at least 10 l/min. whenwater supply is open.Filter in the water supply blocked. Switch off the appliance and pull out themains plug. Turn off water supply.Unscrew water connection.Clean filter in the supply hose. Screwwater connection on again. Check forleaks. Reconnect power supply. Switch onthe appliance.Fault code “:‹ˆ is lit. Intake opening (on right inside ofappliance) covered by utensils.Arrange utensils so that the intakeopening is not obstructed.Fault code “:‚ƒ is lit. Heating element calcified orsoiled.Clean appliance with dishwasher cleaningagent or descaler. Operate the dishwasherwith water softening system and check thesetting.~ " Water softeningsystem/special salt" on page 14Fault code “:‚… is lit. Water protection systemactivated.Turn off water supply.Call customer service and quote the faultcode.Fault code “:‚† is lit.Fault code “:‚‡ is lit. Constant water supply.Fault code “:ƒƒ is lit. Filters 1Z are soiled orblocked.Clean filters. ~ "Filters" on page 34*Depending on the features of your dishwasher