Bosch SMS23BW01T User Manual

Also see for 2: Quick installation guide Manual for installation and utilisation Original instructions Original instructions Manual

en Rinse aid system30Rinse aid systemRinse aid systemRinse aid systemYou can use the rinse aid systemand rinse aid to get tableware andglasses rinsed perfectly withoutmarks.Rinse aidFor optimum drying results, use rinseaid.Only use rinse aid for domestic dish-washers.Adding rinse aidIf the rinse aid refill indicator lightsup, top up with rinse aid. Only userinse aid for domestic dishwashers.1. Press the catch on the lid of thedispenser for rinse aid and lift.122. Add rinse aid up to the max mark.max3. If rinse aid spills out, remove itfrom the tub.Spilled rinse aid can cause ex-cessive frothing during the washcycle.4. Close the lid of the dispenser forrinse aid.a The lid clicks into position.Setting the amount of rinseaidIf there are streaks or water marks ontableware, change the amount ofrinse aid.1. Press .2. Press and hold .3. Turn the programme selector untilthe display shows r:05.4. Release the button.5. Turn the programme selector untilthe right amount of rinse aid hasbeen set.The factory setting is level r:05.– A low setting adds less rinse aidduring the wash cycle and re-duces streaking on tableware.– A higher setting adds morerinse aid during the wash cycle,reduces water marks and im-proves the drying result.6. Press to save the setting.Switching rinse aid system offIf you find the rinse aid refill indicatorirritating, e.g. when using combineddetergents with a rinse aid compon-ent, you can switch the rinse aid sys-tem off.Tip: The function of rinse aid is lim-ited with combined detergents. Youwill generally get better results usingrinse aid.1. Press .2. Press and hold .3. Turn the programme selector untilthe display shows r:05.