Bosch Rexroth HQ 2/C-H Assembly Instructions Manual

6/64 About this documentationBosch Rexroth AG, Material and information flow technology: HQ 2/C-H, HQ 4, 3 842 358 792/2016-12Safety instructions are set out as follows:SIGNAL WORDType and source of dangerConsequences of non-compliance Steps to prevent danger …• Warning sign: points out the danger• Signal word: indicates the severity of the danger• Type and source of danger: indicates the type and source of the danger• Consequences: describes the consequences of non-compliance• Prevention: states how the danger can be avoidedTable 2: Risk classes according to ANSI Z535.6-2006Warning sign, signal word MeaningDANGER Indicates a hazardous situation that will result in seriousinjury or death if not avoided.WARNING Indicates a hazardous situation that may result in severeinjury or death if not avoided.CAUTION Indicates a hazardous situation that may result in minor tomoderate injury if not avoided.NOTE Property damage: The product or the surrounding areacould be damaged.1.3.2 SymbolsThe following symbols indicate important information that is not safety-relevant butincreases the comprehensibility of the documentation.Table 3: Meaning of the symbolsSymbol MeaningIf this information is not heeded, the product cannot be used and/oroperated as designed. Single, isolated step1.2.3.Numbered steps:The numbers indicate that the steps must be performed in sequence.