Menu
Bosch Rexroth AGEV1-48404-AA/HM/L01H01-XC Operating Instructions Manual
                                        |
34/40 Technical dataBosch Rexroth AG, Manifold block type AGEV1-48404-AA/HM/L01H01-XC, RE 62272-B/03.1914.2 Fault tableManifold blocks are usually not sensitive to faults if the prescribed operatingconditions and hydraulic fluid quality are complied with.In the case of faults of individual components refer to the product description oroperating instructions of the components, see 16.1“List of addresses“.15 Technical dataTabelle 8: Technical dataGeneralInstallation orientation optionalInstallation conditions Coasts and offshore with salt-laden airAdmissible ambient temperature range °C -20...+50Storage temperature range°C-10...+50Weightkg160Surface protection CP7A DCCS92010, corresponds to C5M,medium, in line with DIN EN ISO 12944-2HydraulicHydraulic fluid Technical specification:AVIA Syntofluid PE-B 50Hydraulic fluid temperature range °C -20...+80Max. permissible degree of contamination of thehydraulic fluidCleanliness class according to ISO 4406 (C)Class 19/17/14Permissible pressures in portsTank port (AAHL, BAHL) bar 50Leakage oil port (Y) bar 20Pressure port (AAL, BAHL) bar 300Pilot pressure (X1AL)barmax. 120 1)Load pressure (piston side, measured at 1.03)barcorresponds to 100 bar, max. 300 barLoad pressure (piston rod side, measured at2.03) barcorresponds to 132 bar, max. 300 barFactory settings of valves when deliveredPressure relief valve (2.04) bar Setting 160 bar at the time of deliveryCounterbalance valve (1.02, 2.02) bar Customer setting on site, 50 bar at the time ofdeliveryFault Possible cause RemedyExternal leakage Seals on connection face damaged Remove the hydraulic component and replacethe seals.Other leakage Replace leaky hydraulic valves. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved