Menu
Bosch REXROTH VSB 40.1 Project Planning Manual
Also see for Rexroth VSB 40.1: Project planning manualProject planning manual
                                                                                       |
7-6 PC Box VSB 40.1DOK-SUPPL*-VSB*40.1***-PR02-EN-PEthernet Interface XLANThe industrial PC can be connected with an Ethernet network via anEthernet interface XLAN.RJ45 female connector, 8-pinType: Ethernet 10Base T / 100Base XCable length: 100 m max.Cable type: Shielded, twisted pairTransmission rate: 10 or 100 Mbits/smax. 100 m1821345678To the networkXLAN, RJ45Ethernet_sst.cdrFig. 7-6: Ethernet interface XLANThe driver configuration of the network connection can be called up in thetask bar or in the "Control Panel" with icon "Network Board". Here you canset among other values, if the data transmission shall occur with10 Mbits/s and/or with 100 Mbits/s.Note: Please observe that the network board of the outstation has tobe able to process the same data transmission rate.XVGA InterfaceAn external monitor (CRT) can be connected to the VGA connection(XVGA) and can be operated as an alternative or parallel to a VDPconnected via the G4 display interface.• Video RAM: 8 MB max.Note: Before plugging-in a graphics card the video adapterintegrated in BIOS has to be switched off.HD female connector, 15-pinCable length: 1.5 m max.Cable type: Shielded, cross section min. 0.14 mm²Max. resolution: 1600 x 1200 pixels, max. 4294 mill.colorsXLAN – Network ConnectionXVGA – Connection for externalmonitor |
Related manuals for Bosch Rexroth VSB 40.1
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved