Menu
Bosch REXROTH VSB 40.1 Project Planning Manual
Also see for Rexroth VSB 40.1: Project planning manualProject planning manual
                                                                                       |
3-8 Safety Instructions for Electric Drives and Controls VSB 40.1DOK-SUPPL*-VSB*40.1***-PR02-EN-P3.9 Protection Against Contact with Hot PartsCAUTIONHousing surfaces could be extremely hot!Danger of injury! Danger of burns!⇒ Do not touch housing surfaces near sources of heat!Danger of burns!⇒ After switching the equipment off, wait at least ten (10)minutes to allow it to cool down before touching it.⇒ Do not touch hot parts of the equipment, such ashousings with integrated heat sinks and resistors.Danger of burns!3.10 Protection During Handling and MountingUnder certain conditions, incorrect handling and mounting of parts andcomponents may cause injuries.CAUTIONRisk of injury by incorrect handling! Bodilyharm caused by crushing, shearing, cutting andmechanical shock!⇒ Observe general installation and safety instructionswith regard to handling and mounting.⇒ Use appropriate mounting and transport equipment.⇒ Take precautions to avoid pinching and crushing.⇒ Use only appropriate tools. If specified by the productdocumentation, special tools must be used.⇒ Use lifting devices and tools correctly and safely.⇒ For safe protection wear appropriate protectiveclothing, e.g. safety glasses, safety shoes and safetygloves.⇒ Never stand under suspended loads.⇒ Clean up liquids from the floor immediately to preventslipping. |
Related manuals for Bosch Rexroth VSB 40.1
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved