English 11Testing Operation1. Turn on power at the breaker.2. Test the oven mode.Select the BAKE mode. See the Use and Care Manualfor detailed operation instructions.3. Verify that the oven light comes on and the oven beginsto preheat.4. Test the door lock.Set the SELF CLEAN mode. Confirm that the doorlocks when the lock icon appears in the display.5. If installing a double oven, test the second oven aswell.6. If any of the tests do not result as explained above,contact Bosch service for assistance. Otherwise, theinstallation is complete at this time.ServiceBefore Calling ServiceSee Use and Care Manual for troubleshooting information.Refer to the Warranty in the Use and Care Manual.To reach a service representative, see the contactinformation at the front of the manual. Please be preparedwith the information printed on your product data platewhen calling.Data PlateThe data plate shows the model and serial number. Referto the data plate on the appliance when requesting service.The data plate is located on the underside of the controlpanel.DataPlate